Guides
Garage door maintenance in Houston's climate
Houston heat, humidity and clay soil are harder on a garage door than a milder, drier city would be. A short, regular check prevents a lot of snapped springs and off-track doors.

A simple yearly habit
Once a year, and again before hurricane season, run the door and watch it. It should travel smoothly, sit level, and stay put if you disconnect the opener and lift it halfway (springs intact only). Listen for new scraping or grinding. Look at the torsion spring for a gap or heavy rust, at the cables for fray, and at the rollers for flat spots or wobbly stems. Test the safety reversal by putting a sturdy object in the door's path; the door should reverse when it meets it. If anything in that list looks wrong, call before it becomes a failure.
Lubrication in this heat
Lubricate roller stems, hinges and the spring a couple of times a year with a lubricant made for garage doors. West-facing doors may need it more often in summer, because the heat thins and throws off the oil. Don't coat the tracks in grease. Don't use a household spray oil that runs off and then turns gummy. If the door is already loud, see the noisy door guide; lubrication helps a dry door, not a broken one.
Climate-specific checks
Humidity rusts springs and bottom brackets; a flaky coil is a warning, especially near Clear Lake or in a damp, unventilated garage. After a long drought or a week of rain, watch for a door that suddenly rubs or leaves an uneven gap at the floor — that's often the slab or framing moving, and it's how doors go off track. Keep photo-eye lenses clean, and after any water in the garage, check the sensors and the bottom of the door before you rely on them. The safe DIY list, and the parts you should not touch, are also in spring safety.
Common questions
How often should a busy family door be checked?
A door that cycles many times a day can use a look every six months, not just once a year. Springs and rollers simply do more work.
Can I tighten the springs myself if the door is getting heavy?
No. That's winding a live spring. Call and we'll measure the door and set the springs correctly.
Does a maintenance visit include a free estimate if something is worn?
Yes. If we find a spring, cable or opener that needs repair, you get a plain explanation and an estimate, and nothing is done until you approve it.
Door stuck? Start with a call.
Tell us what the door is doing and roughly where in Houston you are. If you would rather type it out, the estimate form goes to the same people.